← Voltar ao feed

Six unpatched pre-auth RCE flaws in Danfoss AK-SM800A refrigeration controllers; agencies urge removing them from the internet

3 fonte(s) · 3 atualização(ões) · publicado 13/11/2026 05:52 · coletado há 5 horas

Matéria consolidada. Reúne 4 matérias que o Tifon tinha publicado separadamente sobre a mesma história. A IA reescreveu o relatório com o que as 3 fontes trouxeram em 17/11/2026 12:04; os links antigos trazem para cá.

Fontes: theregister.com ↗ thehackernews.com ↗ gbhackers.com ↗

Dutch consultancy Midnight Blue (researcher Carlo Meijer) disclosed six zero-day flaws in Danfoss AK-SM800A refrigeration controllers that let a remote, unauthenticated attacker run code as root (gbhackers.com, thehackernews.com). Every firmware version up to and including 5.3.2 is affected, and the researchers say firmware 5.4.0 does not fix the flaws (thehackernews.com). No patch exists and no CVE IDs have been assigned; gbhackers.com says CVEs are pending. Coordinated disclosure with Danfoss is ongoing and technical details are withheld; Danfoss did not respond to The Register (theregister.com, Nov 17). Agencies in Belgium (CCB), Ireland (NCSC) and Germany (BSI) told operators to remove management interfaces from the internet (thehackernews.com). gbhackers.com says CISA and the FBI have also warned about attacks on industrial refrigeration systems. Attacks on such controllers in France since October 11 and across Europe caused unwanted defrost cycles and destroyed stock, but whether they are linked to these flaws is disputed (see Conflicting Reports).

Entenda a falha

A vulnerabilidade

Six unpatched zero-days, with no CVE IDs yet (gbhackers says they are pending), affect the Danfoss AK-SM800A refrigeration controller in every firmware version up to and including 5.3.2. A remote attacker with network reach and no login could run code as root. Five flaws are stack buffer overflows in unauthenticated web request handlers. The sixth is a memory corruption bug in the gateway that enforces Strict session control, so enabling Strict mode does not stop it. Researchers say 5.4.0 does not fix them, while the BSI first said it was unaffected and then said it cannot rule that out. No fixed version exists.

Como funciona

A web request reaches the controller's web task, which runs as root. In the five handler bugs, the code copies request data into a fixed-size stack buffer with strcpy() without checking its length, so oversized input overwrites adjacent stack memory and makes the service crash. The sixth bug is in the separate gateway that blocks every request except login until the user has authenticated. Memory is corrupted there before authentication completes, and an emulated 5.3.2 crashed. The researchers say the crash can become code execution with more work. For the strcpy() bugs, an attacker must first get around the copy stopping at a null byte.

Por que é vulnerável

The root cause is the vendor's extremely liberal use of strcpy() without length checks, with hundreds of such calls in unauthenticated handlers. The firmware also lacks basic mitigations: no stack canaries and no PIE, which Meijer says only need a compiler flag. The vulnerable application runs as root, and the controllers do not use the i.MX6 secure boot, so implanted code could survive a factory reset or firmware update. No fix has been published, so the articles say nothing about what a fix would change.

Onde está

The gbhackers article names the sm_app binary, specifically its web task with the unauthenticated handlers, and sm_fcgi_app, which handles Strict session control. Specific endpoints are withheld during coordinated disclosure.

Como foi descoberta

Carlo Meijer of Midnight Blue found the flaws by manual review, without AI, in under an hour, using firmware the vendor offers for download and emulating it in user space with QEMU. He looked at places where strcpy() is called and quickly found five that crashed the service. Midnight Blue published a technical write-up but withholds endpoint details while coordinated disclosure with Danfoss continues. Danfoss did not respond to The Register, and its advisory page lists nothing for these flaws. Belgium's CCB, Ireland's NCSC and Germany's BSI issued warnings. No exploitation of these six flaws is stated, and a link to the recent attacks on European controllers is unconfirmed.

PoC existente, privada

O exploit existe, mas quem o tem não o publicou.

No public PoC exists. Meijer says a one-line cURL command triggers a segfault in five of the flaws. According to The Hacker News, the researchers ran code as root through one handler flaw on older firmware 3.3.0 and found the same bugs in 5.3.2. The Register only says remote code execution is feasible, not demonstrated. The sixth flaw was only crashed in an emulator. Exploit details are withheld, but Meijer calls exploitation straightforward for an experienced developer, so exposed units should be taken offline now.

Explicação gerada por IA a partir da matéria e dos artigos, em 17/11/2026 12:19.

Detalhes técnicos

  • Five flaws are in web request handlers that need no login, in a program that runs as root. The researchers achieved root code execution on firmware 3.3.0 and found the same bugs in 5.3.2 (thehackernews.com).
  • theregister.com describes the five as strcpy()-based stack buffer overflows on ARM Linux that crash the service with a single cURL command.
  • The sixth flaw is in the gateway that enforces Strict mode. It crashed in an emulator running 5.3.2. The researchers say the crash could be turned into code execution, and the gateway lacks stack canaries (thehackernews.com). theregister.com calls it a pre-auth memory corruption bug in the "session control" authentication layer and says Strict session control does not stop it.
  • The controllers run a Danux OS on i.MX6 processors without common exploit mitigations such as stack canaries or PIE (gbhackers.com, theregister.com).
  • Meijer says remote code execution is feasible after working around strcpy()'s null-byte limit (theregister.com).
  • There is no secure boot, so implanted code could survive a factory reset or firmware update, and an attacker could also brick the unit, for example by wiping flash and pushing a malformed firmware (gbhackers.com, thehackernews.com, theregister.com).
  • With root, an attacker could change settings, start defrost cycles and hide the activity from logs (thehackernews.com).
  • Meijer found the flaws in under an hour of manual review (thehackernews.com, theregister.com). gbhackers.com notes the flaws undermine device security despite Danfoss business units holding IEC 62443-4-1 certifications.
  • theregister.com states no exploitation of these six flaws in the wild.

Remediação

  • Find every controller reachable from the internet, including through 4G/5G modems, and remove that exposure immediately; Meijer and the CCB both recommend this (thehackernews.com, theregister.com).
  • Allow remote access only through a secure VPN or a protected internal network. IP allow-listing of the service company is only a short-term measure (thehackernews.com, gbhackers.com).
  • Check setpoints, defrost schedules, alarms, user accounts and remote-access settings for unexpected changes. If compromise is suspected, change all credentials and verify the connected equipment works properly (BSI, via thehackernews.com).
  • Before cutting off the data sent to the service company, check contract and insurance terms (CCB, via thehackernews.com).
  • Updating firmware, changing default passwords or enabling Strict mode is not sufficient on its own. Danfoss's own update guide says the unit should not be directly reachable from the public internet, even with Strict Mode enabled (thehackernews.com). Meijer calls Danfoss's advice (rotate credentials, patch, enable strict session control) insufficient and advises against spending scarce resources on patching; the CCB also recommends applying patches when they become available (theregister.com).

Relatos divergentes

  • Link to the attacks: gbhackers.com (Nov 13) ties the flaws to attacks in France since October 2026 that caused spoiled food and fires. thehackernews.com (Nov 16) says the BSI has no information on exploitation of these six flaws and that no source links them to the recent attacks. It also mentions only destroyed stock, not fires. theregister.com (Nov 17, most recent) links the vendor's controllers to recent attacks on European supermarkets and blood banks but states no exploitation of these six flaws. Treat the link as unconfirmed.
  • Firmware 5.4.0: The BSI first said 5.4.0 was not affected, then corrected itself the same day to say it cannot rule out that 5.4.0 is affected. The researchers say 5.4.0 does not fix the flaws, citing a build date of about October 29. Danfoss's 5.4.0 readme and update guide mention no vulnerability fix, and its advisory page lists no advisory for these flaws (thehackernews.com). gbhackers.com only says versions up to 5.3.2 are affected; theregister.com names only 5.3.2.
  • Code execution status: thehackernews.com says the researchers achieved root code execution on firmware 3.3.0. theregister.com says RCE is feasible per Meijer but does not say it has been demonstrated, and describes the five handler bugs as crashing the service.
  • CVEs: gbhackers.com says CVEs are pending; thehackernews.com says none have been assigned; theregister.com lists no CVE IDs, CVSS scores or vendor advisory.
  • Sourcing: thehackernews.com states its report rests on a single news report, with the researchers, the agencies and Danfoss as sources. theregister.com's account rests on its own article alone.

Linha do tempo

  1. theregister.com ↗ · pub. 17/11/2026 10:32 · coletado 17/11 11:00

    Midnight Blue researcher discloses six unpatched zero-days in Danfoss AK-SM800A refrigeration controller firmware 5.3.2

    ler a análise desta fonte

    Dutch researcher Carlo Meijer of Midnight Blue reported six zero-days in the Danfoss AK-SM800A refrigeration controller (firmware 5.3.2). He found them manually in under an hour. Five are strcpy()-based stack buffer overflows that crash the service with a single cURL command. A sixth is a pre-auth memory corruption bug in the "session control" authentication layer. The Centre for Cybersecurity Belgium (CCB) warns that attackers could take control without credentials, persist after resets or disable the controllers. Danfoss did not respond to The Register. No CVE IDs, CVSS scores or vendor advisory appear in the article, and no web research was performed, so this record rests on the article alone.

    Technical Details

    • The flaws are stack-based buffer overflows on ARM Linux. The firmware has no stack canaries and no position-independent executables.
    • The exploited application runs as root.
    • Meijer says remote code execution (RCE) is feasible after working around strcpy()'s null-byte limit. The article does not say that RCE has been demonstrated.
    • Strict session control does not stop the sixth bug, a pre-auth memory corruption flaw.
    • The controllers do not use their processor's secure boot, so implants could persist, or flash could be wiped and a malformed firmware pushed to brick them.
    • No exploitation of these six flaws in the wild is stated. The article links the vendor's controllers to recent attacks on European supermarkets and blood banks.

    Remediation

    • Remove direct internet exposure immediately. Meijer and the CCB both recommend this.
    • Meijer advises against spending scarce resources on patching, and calls Danfoss's advice (rotate credentials, patch, enable strict session control) insufficient.
    • The CCB also recommends applying patches when they become available.
  2. thehackernews.com ↗ · pub. 16/11/2026 09:34 · coletado 16/11 12:00

    Six unpatched Danfoss AK-SM800A refrigeration controller flaws allow unauthenticated remote takeover; agencies urge removal from internet

    ler a análise desta fonte

    Dutch consultancy Midnight Blue disclosed six flaws in Danfoss AK-SM800A refrigeration controllers that could let a remote, unauthenticated attacker take over a device and run code as root. No patch exists. The researchers say firmware 5.4.0 does not fix them, and every version up to and including 5.3.2 is affected. No CVE IDs have been assigned. Agencies in Belgium (CCB), Ireland (NCSC) and Germany (BSI) told operators to remove management interfaces from the internet. The BSI has no information on exploitation of these six flaws, and no source links them to the recent attacks on such controllers in France (from October 11) and across Europe. Those attacks caused unwanted defrost cycles and destroyed stock. This is based on a single news report; the article's sources are the researchers, the agencies and Danfoss.

    Technical Details

    • Five of the flaws are in web request handlers that need no login, in a program that runs as root. The researchers achieved root code execution on firmware 3.3.0 and found the same bugs in 5.3.2.
    • The sixth flaw is in the gateway that enforces Strict mode. It crashed in an emulator running 5.3.2. The researchers say the crash could be turned into code execution, and the gateway lacks stack canaries.
    • There is no secure boot, so implanted code could survive a factory reset and a firmware update. An attacker could also brick the unit.
    • With root, an attacker could change settings, start defrost cycles and hide the activity from logs.
    • Researcher Carlo Meijer found the flaws in under an hour of manual review. Technical details are withheld during coordinated disclosure with Danfoss.

    Remediation

    • Find every controller reachable from the internet, including through 4G/5G modems, and remove that exposure.
    • Allow remote access only through a secure VPN or a protected internal network. IP allow-listing of the service company is only short-term.
    • Check setpoints, defrost schedules, alarms, user accounts and remote-access settings for unexpected changes.
    • If compromise is suspected, change all credentials and verify the connected equipment works properly (BSI).
    • Before cutting off the data sent to the service company, check contract and insurance terms (CCB).
    • Updating firmware, changing default passwords or enabling Strict mode is not sufficient on its own. Danfoss's own update guide says the unit should not be directly reachable from the public internet, even with Strict Mode enabled.

    Conflicting Reports

    The BSI first said 5.4.0 was not affected, then corrected itself the same day to say it cannot rule out that 5.4.0 is affected. The researchers say 5.4.0 does not fix the flaws, citing a build date of about October 29. Danfoss's 5.4.0 readme and update guide mention no vulnerability fix, and its advisory page lists no advisory for these flaws.

  3. gbhackers.com ↗ · pub. 13/11/2026 05:52 · coletado 13/11 06:00 primeiro registro

    Six pre-authentication zero-day RCE vulnerabilities found in Danfoss AK-SM800A refrigeration controllers enabling remote root access

    ler a análise desta fonte

    Researcher Carlo Meijer of Midnight Blue discovered six zero-day vulnerabilities allowing remote code execution without authentication in Danfoss AK-SM800A refrigeration controllers, affecting all firmware versions up to 5.3.2. These exploitable flaws permit attackers to execute commands as root, including triggering defrost cycles that have led to spoiled food and fires in attacks observed in France since October 2026. The controllers run a Danux OS on i.MX6 processors without common exploit mitigations like stack canaries or PIE, and do not utilize secure boot, allowing implanted malware to survive factory resets or firmware updates. The vulnerabilities severely undermine device security despite Danfoss business units holding IEC 62443-4-1 certifications. Coordinated disclosure with Danfoss is ongoing with CVEs pending. CISA and FBI have issued warnings about attacks on such industrial refrigeration systems, highlighting risks beyond Europe. Asset owners are advised to restrict management access via VPNs or IP allowlists as interim mitigation.