← Voltar ao feed
high

Zenitel fixes 11 flaws incl. CVE-2026-95377 root command injection in IP intercoms and Zenitel Connect chain to root

1 fonte(s) · 1 atualização(ões) · publicado 15/11/2026 21:00 · coletado há 7 horas

Zenitel fixed 11 vulnerabilities on November 13, 2026 in its IP intercom firmware (VSFF6, VSFF8, VSFF8MP, VSFF8MN, VSFT) and the Zenitel Connect server. The most severe, CVE-2026-95377 (CVSS v4 9.4), lets an attacker on the same network segment run commands as root without credentials. Zenitel states it is not aware of any exploitation. The article is the only source used; no web research was performed, so the vendor advisory, CVSS vectors and fix commits were not verified.

Entenda a falha

A vulnerabilidade

Zenitel fixed 11 flaws in the VSFF6, VSFF8, VSFF8MP, VSFF8MN and VSFT IP intercom firmware and in the Zenitel Connect server. The worst, CVE-2026-95377 (CVSS v4 9.4), is a command injection in the TFTP provisioning module. An unauthenticated attacker on the same network segment, acting as a rogue DHCP server, gets commands run as root. Next is a Connect chain: CVE-2026-95615 (command injection into an application container by any authenticated user, even the lowest privilege), CVE-2026-95614 (container escape to host root) and CVE-2026-95613 (database superuser access, exposing the master encryption key and password hashes). Any valid account plus network access gives root on the host. Two path traversal flaws in certificate handling affect only 10.x firmware from 10.0.3.0 and let an administrator write or delete arbitrary files as root. Five milder flaws are also fixed. Affected: firmware before 9.6.3.0 (9.x) and before 10.1.3.0 (10.x), and Connect before 1.11.0.

Como funciona

When a device boots or renews its DHCP lease, it asks the DHCP server for network settings, including the name of the TFTP server used for provisioning. The provisioning module takes that TFTP server name and passes it to a shell. A rogue DHCP server on the same segment can answer with a crafted name. Because the value is not sanitized, the shell treats part of it as a command and runs it as root. Since DHCP is the factory default, this exposure recurs on every boot and lease renewal. In Connect, a logged-in user reaches the application container, escapes it to the host and then reaches the database with superuser rights.

Por que é vulnerável

For CVE-2026-95377 the root cause is missing sanitization: a value received over the network from DHCP, the TFTP server name, is trusted and handed to a shell without validation. The device also implicitly trusts any DHCP server on the segment. The articles do not detail the root causes of the Connect flaws or the path traversal bugs beyond the effects described, and do not say why they went unnoticed. The fix is delivered in firmware 9.6.3.0 and 10.1.3.0 and in Connect 1.11.0; the articles do not describe the code changes.

Onde está

For CVE-2026-95377, the TFTP provisioning module of the intercom firmware; the articles name no file, function or commit.

Como foi descoberta

The articles do not say who found the flaws or how. Zenitel published a security advisory and fixes on November 13, 2026, and says it is not aware of any exploitation. Securityonline.info reported it on November 16, 2026, based on that advisory.

Explicação gerada por IA a partir da matéria e dos artigos, em 15/11/2026 22:15.

Detalhes técnicos

  • CVE-2026-95377: command injection in the TFTP provisioning module. A rogue DHCP server on the same segment sends a crafted TFTP server name that is passed to a shell unsanitized, running as root. Devices using DHCP (the factory default) are exposed on every boot and lease renewal.
  • Two further device flaws affect only 10.x firmware from 10.0.3.0. They are path traversal issues in certificate handling that let an administrator write or delete arbitrary files as root.
  • Zenitel Connect chain: CVE-2026-95615 (command injection into an application container by any authenticated user), CVE-2026-95614 (container escape to host root) and CVE-2026-95613 (database superuser access, exposing the master encryption key and password hashes). Any valid account plus network access gives root on the host.
  • The remaining five flaws are milder: public source maps, account lockout abuse, username enumeration, unlimited password guessing on an unused login path, and phishing through an unsandboxed frame.
  • Affected: device firmware before 9.6.3.0 (9.x) and before 10.1.3.0 (10.x); Zenitel Connect before 1.11.0.

Remediação

  • Upgrade devices to 9.6.3.0 or 10.1.3.0 and Zenitel Connect to 1.11.0. Install the Connect fixes as a single upgrade.
  • If devices cannot be patched, use static IP addresses or enable DHCP snooping on access switches.
  • Restrict Connect web and API access to trusted management networks and enforce strong, unique passwords.
  • Replace the factory self-signed certificate on the Connect admin interface, because the update does not change it.

Linha do tempo

  1. securityonline.info ↗ · pub. 15/11/2026 21:00 · coletado 15/11 22:00 primeiro registro

    Zenitel fixes 11 flaws incl. CVE-2026-95377 root command injection in IP intercoms and Zenitel Connect chain to root

    ler a análise desta fonte

    Zenitel fixed 11 vulnerabilities on November 13, 2026 in its IP intercom firmware (VSFF6, VSFF8, VSFF8MP, VSFF8MN, VSFT) and the Zenitel Connect server. The most severe, CVE-2026-95377 (CVSS v4 9.4), lets an attacker on the same network segment run commands as root without credentials. Zenitel states it is not aware of any exploitation. The article is the only source used; no web research was performed, so the vendor advisory, CVSS vectors and fix commits were not verified.

    Technical Details

    • CVE-2026-95377: command injection in the TFTP provisioning module. A rogue DHCP server on the same segment sends a crafted TFTP server name that is passed to a shell unsanitized, running as root. Devices using DHCP (the factory default) are exposed on every boot and lease renewal.
    • Two further device flaws affect only 10.x firmware from 10.0.3.0. They are path traversal issues in certificate handling that let an administrator write or delete arbitrary files as root.
    • Zenitel Connect chain: CVE-2026-95615 (command injection into an application container by any authenticated user), CVE-2026-95614 (container escape to host root) and CVE-2026-95613 (database superuser access, exposing the master encryption key and password hashes). Any valid account plus network access gives root on the host.
    • The remaining five flaws are milder: public source maps, account lockout abuse, username enumeration, unlimited password guessing on an unused login path, and phishing through an unsandboxed frame.
    • Affected: device firmware before 9.6.3.0 (9.x) and before 10.1.3.0 (10.x); Zenitel Connect before 1.11.0.

    Remediation

    • Upgrade devices to 9.6.3.0 or 10.1.3.0 and Zenitel Connect to 1.11.0. Install the Connect fixes as a single upgrade.
    • If devices cannot be patched, use static IP addresses or enable DHCP snooping on access switches.
    • Restrict Connect web and API access to trusted management networks and enforce strong, unique passwords.
    • Replace the factory self-signed certificate on the Connect admin interface, because the update does not change it.